Standard Features


Warranty:

Standard two (2) year manufacturer’s parts warranty.

Drive System:

2:1 Roped Hydraulic

Lead Times:

(72) business hours based on ALL standard features. Any job with non-standard features allow (2-3) week minimum lead time.

Capacity:

950 Pound maximum per ASME/ANSI A17.1, 5.3

Travel:

Based on actual job conditions with a maximum travel of up to 50’-0” from the lowest landings’ finished floor level to the top landings’ finished floor level.

Car Speed:

40 FPM (Foot per Minute) maximum per code.

Cab:

¾”, seven ply cabinet grade architectural veneer plywood with 16ga steel, primed and powder coated strike columns (where applicable) and gate pockets. All cabs are custom built to suit the finished, clear shaft dimensions.

Cab Heights:

6’-10” (6’-9-1/4” Clear inside cab height to accommodate 6’8” landing doors).

Cab Design:

In-line opening, Flat Wall (FW) cab and ceiling design.

Platform:

Up to 13 square feet inside usable cab space (Industry standard 12 square feet).

Standard Wood Species:

Unfinished White Birch, Red Oak and White Maple. Pre-finished Red Oak or White Maple.

Cab Gate:

(1) – Black or White vinyl accordion gate with gate arm and gate switch.

Hall Stations:

#4 (brushed) Stainless Steel hall stations with single pushbutton and illuminated “car here” light ring.

Car Operating Panel (COP):

#4 (brushed) Stainless Steel Car Operating Panel with the required illuminated floor buttons, stop switch, alarm button, integrated phone keypad and emergency light.

Cab Lighting:

(2) – 3” Nickel or white recessed light fixtures with energy saving LED bulbs.

Emergency Cab Lighting:

One 24VDC emergency light integrated into the Car Operating Panel and used during battery backup operation.

Handrail:

One (1)- ¼” x 1-1/2”, #4 (brushed) solid stainless steel flat bar handrail with removable inside mounts.

Pumping Unit:

All aluminum construction with a primed and powder coat finish. Two speed electronic valve operation with both load and temperature compensation, manual lowering valve, low pressure switch, pressure gauge port and two way automatic leveling features. The unit is provided with a lockable cover.

Automatic Emergency Lowering:

If the controller senses a loss of house power while the elevator is in flight the elevator will stop and begin to descend to the next lowest landing. If the next lowest landing is not the lowest landing the operator will have the ability to stop at any of the remaining lower floors.

Auto Light Timer:

Automatically turns the light off after the elevator has come to rest at a floor and the landing door and gates are closed. The amount of time the light remains on is adjustable ranging from 1-10 minutes.

Auto Homing:

Provides the ability to home (park) the elevator to a selected floor after an adjustable amount of time ranging from 1-30 minutes after the landing door and gates are closed.

Floor Heights:

Minimum of 12” floor-to-floor heights.